The obvious advantage of Air cooled fluid cooler is that it does not require any water after its first charge. This is completely a closed circuit system. The hot fluid (water) from the source is made to pass through finned surface heat transfer coils & using the heat is rejected to ambient air passing through coils using axial fans.

 ADVANTAGES: 

• Cooling media is only free air
• 100 % water saving-Does not require water after its first charge.
• Water treatment plants and chemicals not required.
• Does not require any tube well boring.
• No problem of scale formation.
• No dreation of DG set due to scale formation.
• Cooling Tower and Shell & Tube Heat Exchangers are not required.
• Raw water pump is not required.
• Substantial energy saving during mild weather conditions.
• No fear of air contamination or pollution.
• Total Maintenance free system.
• No Engine downtime for maintenance.

APPLICATIONS:

• Diesel Engine Gensets.
• Steam turbine exhaust steam condensing.
• Charge air cooling.
• Lubricating oil cooling.

• Exhaust steam condensing.
• Furnace cooling. Oil cooling.
• Hydraclic oil cooling.
• Quenching oil cooling.

TECHNICAL INFORMATION:

Air-cooled Fluid Cooler is High Efficiency dry cooling system. Air cooled fluid coolers works on principle of rejecting heat from hot fluid to ambient-air directly through heat transfer coils. This is in contrast to conventional method of cooling using shell & tube heat exchanger & wet cooling tower system.

Heat Transfer Coils:- The coils are made of seamless copper / steel tubes & fins of Aluminum / copper high efficiency sine wave Fins produced on our automatic punching press.The selection, construction of coils is through CAD/CAM system, which is unique feature of our advanced technology. Hydraulic / Bullet Expandtion process is used for tube expansion which ultimately makes high efficiency heat transfer coils.

Axial Flow Fans:-Axial flow fans are direct drive with adjustable pitch aero foil designed. The fan blades are of Glass reinforced polyamide/ polypropylene of Aluminum & pressure die cast alloy hub. The fan is directly mounted on the motors shaft using taper lock bush for execllent gripping.

Casing : Casing is made of Epoxy coated /Galavanized steel.

Motors : Motors are totally enclosed fan cooled type (TEFC), to protection against dust/moisture with class F installation and 415 ± 10V / 3ph / 50 HZ.of reputed make.

Headers: Header are made of heavy duty steel/ copper  pipe and are complete with mating flanges & air purging valves.

OTHER PRODUCT RANGE

1.      Shell and Tube Heat Exchanges

2.      Cooling / Heat Coils

3.      Fin Tube Heat Exchangers

4.      Sample coolers

5.      Inter coolers/Aftercoolers